What have you done to your Silverado ZR2 this week? 🛠️

[AXE]

She got a bath. With the ceramic and my new pressure washer/DI spotless setup washes take no time.

Applied Adam’s Graphene Glass coating to the windows and mirrors. If it lasts a year and works, this stuff is the shit, easier to apply than RainX and probably similar price if you don’t have to apply it every wash.

Bring it out West and we'll pop your cherry!

 

[GATORB8]

Bring it out West and we'll pop your cherry!

Should be in Moab April and NorCal late summer. The Jeep will be the one risking body damage though.

 

[Kambeaux]

Chrome delete complete. (Except the lug nuts)

 

[C2s ZR2]

Swapped the Silverado sport running boards and the TruXedo Pro X15 low-profile tonneau cover from my old Trail Boss over to the ZR2. The wife and daughter are much happier now that getting into the truck is a bit easier! Also transferred my faded .50 cal antenna while I was at it. Loving the upgrade from the Trail Boss—this ZR2 is a whole new level!

The night pic was taken during an anniversary glamping trip I took with my wife to Fredericksburg, TX. The ZR2 made the trip even better!

 

[MNNJR69]

Added the ultimate 9 throttle controller
The Opt7 Aurora lighting kit
The Nlight 4ft RGB flag with spring mount quick disconnect.
Put on a new pair of sliders cuz the old ones were hit.

 

[MNNJR69]

Just waiting for the Auxbeam AC 1200 12 gang switch box with remote to come before I wire everything up. Front bumper and winch are next along with some light pods for the hood and the sides of the overland rack

I'll include pictures when everything's up and running

 

[BowTieGuy]

Let's see what you have done with your Silverado ZR2!

I’ve put almost 5k miles on these new shoes, think I’m going to like them this winter. Best thing is no cutting was involved in swapping out factory wheels.

 

[AXE]

I’ve put almost 5k miles on these new shoes, think I’m going to like them this winter. Best thing is no cutting was involved in swapping out factory wheels.

I think you'll like them as far as wear goes. I've got about 13k on mine and they hardly look used. That little lip on the top of the lugs is just now starting to disappear.

 

[Byrds8]

Grill badge changed out. No more chrome on the truck other than the silver buttons in the handles lol.

Throttle controller out for delivery. Awesome since it wasnt due until Monday....now the wait.

 

[Millertime1977]

Put the RAS suspension kit on. Raised back about 1.5”. Went back and forth between this and airbags but decided to try this.

 

[Millertime1977]

Put the RAS suspension kit on. Raised back about 1.5”. Went back and forth between this and airbags but decided to try this.

Before

 

[Millertime1977]

Before

After

 

[Gandalfthegrey]

Ceramic Tint. Chewing on some PPE Tubes and T delete but being a sissy about my warranty.

 

[surfdoc81]

First mod. Picked up a GM Performance exhaust (borla touring) on marketplace for a great price. Truck no longer sounds like a minivan.

 

[ZR2BIZON]

Made a custom plate for my Decked System.

 

[DNZR2]

The big brown truck showed up this evening. Hope to get it installed tomorrow.

 

[MNNJR69]

So I bought a boat load of items for the truck. An entire Bulletpoint mounting system with all the goodies. A hand held radio mount, 2 phone mounts, a Bulletpoint 8 gang switch with mounting plate with an articulating arm, 3 X 20mm ball mounts for the base, 50ft of 12 ga wire to wire up all the extras. A Nilight 5ft RGB flag, 2 X 4.5in side shooter lights for the sides of the rack, the rough country extended angle ditch light kit, the Nilight Aurora underglow kit (the RV kit for extra strips), Nilight RGB bed light kit for the bed of the truck. Also got extra fuse kit, crimp line heat shrink wire connector kit with the tool, 6 piece fuse tap kit, a 50in triple row light bar for the front bumper and extra mount clips. Also Opt7 triple row light bar for the top of the rack in the back to mount under the light bar. Now all I have to do is put everything together


I'll post pictures when I get it all squared away.

 

[ZR2BIZON]

So I bought a boat load of items for the truck. An entire Bulletpoint mounting system with all the goodies. A hand held radio mount, 2 phone mounts, a Bulletpoint 8 gang switch with mounting plate with an articulating arm, 3 X 20mm ball mounts for the base, 50ft of 12 ga wire to wire up all the extras. A Nilight 5ft RGB flag, 2 X 4.5in side shooter lights for the sides of the rack, the rough country extended angle ditch light kit, the Nilight Aurora underglow kit (the RV kit for extra strips), Nilight RGB bed light kit for the bed of the truck. Also got extra fuse kit, crimp line heat shrink wire connector kit with the tool, 6 piece fuse tap kit, a 50in triple row light bar for the front bumper and extra mount clips. Also Opt7 triple row light bar for the top of the rack in the back to mount under the light bar. Now all I have to do is put everything together


I'll post pictures when I get it all squared away.

Guac Money!!

 

[MNNJR69]

Guac Money!!

It was my savings for the front bumper and winch....now I have to start the piggy bank all over again

 

[MrScottly]

So I bought a boat load of items for the truck. An entire Bulletpoint mounting system with all the goodies. A hand held radio mount, 2 phone mounts, a Bulletpoint 8 gang switch with mounting plate with an articulating arm, 3 X 20mm ball mounts for the base, 50ft of 12 ga wire to wire up all the extras. A Nilight 5ft RGB flag, 2 X 4.5in side shooter lights for the sides of the rack, the rough country extended angle ditch light kit, the Nilight Aurora underglow kit (the RV kit for extra strips), Nilight RGB bed light kit for the bed of the truck. Also got extra fuse kit, crimp line heat shrink wire connector kit with the tool, 6 piece fuse tap kit, a 50in triple row light bar for the front bumper and extra mount clips. Also Opt7 triple row light bar for the top of the rack in the back to mount under the light bar. Now all I have to do is put everything together


I'll post pictures when I get it all squared away.

Do you know how much hookers and blow ya coulda.....Oh, never mind.