new tires with leveling kit

[pas21771]

came out level had to add 3/8 wheel spacer for the new control arm is larger than stock and tried 305 but they rubbed alot. went with 295 70 18 mickey thompson at and had about an inch of at full turn and about 5/16 inside tire on front from the upper control arm

 

[ZR2EDDYB]

Which peak kit did you utilize?

 

[pas21771]

Which peak kit did you utilize?

summit kit with 2.25 top and bottom front spacer and 1" block on back. cost me 1377

 

[DNZR2]

Looks sharp

 

[MotorCitySteel]

came out level had to add 3/8 wheel spacer for the new control arm is larger than stock and tried 305 but they rubbed alot. went with 295 70 18 mickey thompson at and had about an inch of at full turn and about 5/16 inside tire on front from the upper control arm

Very nice, clean too

 

[Rclough68]

came out level had to add 3/8 wheel spacer for the new control arm is larger than stock and tried 305 but they rubbed alot. went with 295 70 18 mickey thompson at and had about an inch of at full turn and about 5/16 inside tire on front from the upper control arm

I did the same but with 285/75/18 I also had to add 3/8' spacers

 

[MotorCitySteel]

I'm going with a 305 70 18, I will make them fit.

 

[Arussell68]

I'm going with a 305 70 18, I will make them fit.

I did the peak 2.25 level, 18x9 0 offset wheels with 305/70/18’s and I’m rubbing on the Bumper and the backside of the fender

 

[MotorCitySteel]

I did the peak 2.25 level, 18x9 0 offset wheels with 305/70/18’s and I’m rubbing on the Bumper and the backside of the fender

1" Bumper spacers and remove the trim piece and plate at the rear of the wheel well. Quick jobs.

 

[Arussell68]

1" Bumper spacers and remove the trim piece and plate at the rear of the wheel well. Quick jobs.

I trimmed the flare, removed the bracket. Also did a very slight bumper trim….no more rubbing

 

[MotorCitySteel]

I trimmed the flare, removed the bracket. Also did a very slight bumper trim….no more rubbing

Nice work! Looks good too!

 

[MotorCitySteel]

I did the peak 2.25 level, 18x9 0 offset wheels with 305/70/18’s and I’m rubbing on the Bumper and the backside of the fender

Stuck with the OEM tire just bigger I see. I was planning on the same. Like them?

 

[AXE]

I did the peak 2.25 level, 18x9 0 offset wheels with 305/70/18’s and I’m rubbing on the Bumper and the backside of the fender

Look at my trim post and you're set free!

 

[Arussell68]

Stuck with the OEM tire just bigger I see. I was planning on the same. Like them?

Love them. Not to mention they were priced well…$1000 on simpletire.com