Exhaust Tips for the OEM Exhaust

[El Chorizo]

The following products on Amazon are discussed in this thread. Thank you to @securityguy for the trial and error and additional pictures. You can skip to the specific post HERE and additional pictures HERE.

https://www.amazon.com/dp/B08CGGGCWQ?psc=1&ref=ppx_yo2ov_dt_b_product_details&tag=zr20d-20

 

[scubatech]

FINALLY!!! I found tips that fit perfectly and are of very good stainless quality. I don't know how the black finish will hold up, but I can always take care of that myself if I have an issue. Here are a few pis and the link to the ones that finally made the cut:

https://www.amazon.com/dp/B08CGGGCWQ?psc=1&ref=ppx_yo2ov_dt_b_product_details

View attachment 1841
View attachment 1842
View attachment 1843
View attachment 1844

I like those a lot SG.

 

[securityguy]

I like those a lot SG.

Thanks...I really do as well.

 

[securityguy]

A few of you have pinged me for a side shot and wanted to know how low they hung. Here you go...as you can see, not low at all with a clearance of 17" from the ground to the bottom most portion of the tip. I think they look awesome for a total of around $50!

 

[philbun]

I like them A lot. Thank you for the pics.

 

[securityguy]

I like them A lot. Thank you for the pics.

You are very welcome my friend!

 

[Mile High]

Those look cool and well worth the few bucks. Thanks for sharing

 

[Mile High]

Latest Amazon set didn’t work either. Trying this one last time before going in a different direction and bagging Amazon for this.

Anybody have an idea on how much I can sell my 2023 ZR2 OEM exhaust system for on offer up? Upgrading to Borla

 

[securityguy]

Anybody have an idea on how much I can sell my 2023 ZR2 OEM exhaust system for on offer up? Upgrading to Borla

Not much if anything at all.

 

[supersix]

FINALLY!!! I found tips that fit perfectly and are of very good stainless quality. I don't know how the black finish will hold up, but I can always take care of that myself if I have an issue. Here are a few pis and the link to the ones that finally made the cut:

https://www.amazon.com/dp/B08CGGGCWQ?psc=1&ref=ppx_yo2ov_dt_b_product_details

Those look great! Can't beat that price!

 

[AXE]

I went with the chrome shorties from Amazon for $15. They look ok, but hard to get even cause my stock exhaust is different on each side. Can't see it on a galloping horse, so I'll run with it.

I cut 1/2 inch slips in base and crimped the remaining tabs down closer to flush to stock exhaust tube. Had nice some $8 stainless bolt style clamps, but they were so slick and stiff they wouldn't mate well to out of round stock exhaust tube. Ended up using some cheap Taiwanese worm drive hose clamps and it tightend up better.

We,ll see how they go for $32.

 

[newcarpro]

A few of you have pinged me for a side shot and wanted to know how low they hung. Here you go...as you can see, not low at all with a clearance of 17" from the ground to the bottom most portion of the tip. I think they look awesome for a total of around $50!

View attachment 1851
View attachment 1852

TY for the research & pics!

 

[andrec10]

FINALLY!!! I found tips that fit perfectly and are of very good stainless quality. I don't know how the black finish will hold up, but I can always take care of that myself if I have an issue. Here are a few pis and the link to the ones that finally made the cut:

https://www.amazon.com/dp/B08CGGGCWQ?psc=1&ref=ppx_yo2ov_dt_b_product_details

View attachment 1841
View attachment 1842
View attachment 1843
View attachment 1844

How is the finish holding up?

 

[securityguy]

How is the finish holding up?

Actually extremely well...zero issue so far.

 

[andrec10]

Actually extremely well...zero issue so far.

Nice! Mine should be here tomorrow.

 

[securityguy]

Nice! Mine should be here tomorrow.

Sweet...ping me if you have any questions. They do look awesome!

 

[AXE]

FWIW, the stainless ones I'm using have discolored some similar to what you see on a motorcycle exhaust due to heat. Still look good, but a slight golden hue to the bases where they attach to the pipe.

 

[andrec10]

FWIW, the stainless ones I'm using have discolored some similar to what you see on a motorcycle exhaust due to heat. Still look good, but a slight golden hue to the bases where they attach to the pipe.

I think the black fits the truck better. IMHO.

 

[AXE]

I think the black fits the truck better. IMHO.

I've got black on my Duramax and it looks great. I've pulled it off, cleaned it, sanded out some minor chips, and repainted using header paint. It looks great years later.

 

[Carramrod]

A few of you have pinged me for a side shot and wanted to know how low they hung. Here you go...as you can see, not low at all with a clearance of 17" from the ground to the bottom most portion of the tip. I think they look awesome for a total of around $50!

View attachment 1851
View attachment 1852

Nice, I just got the same ones, are yours touching the bottom of the bumper? Or space between the top of the tips and bumper ?