Bars for mounting lights - whatcha got?

[JaredW]

Im having a hard time understanding why we can't just, nicely, mount them to the bumper? Am I missing some code of conduct? Is it trashy to do that? Do it need to be on a bracket and become over complicated?

Dirt King has done some similar setups. I think with the 3" pods it could be made to look good. I've contemplated doing it too.

 

[amateurhour]

That's slick, but it's for the HD trucks. I'm after a solution for the half-ton trucks.


Maybe something could be made or adapted from these brackets? Maybe the brackets could be swapped, giving a shorter distance between the mountain points. Then, fabbing something up that spans the new, shorter bracket distance, one could mount a 10-inch light bar and a pair of Baja Designs S4 lights.

I don’t see why that wouldn’t work. A little googling showed that a guy with an at4x made his own brackets did basically that but with linkable baja design lights. His truck has the bison bumper, but the concept is the same. His brackets might even work with a silverado bison bumper

AEV Front Bumper Light Brackets

I ended up fabricating a behind the grill mount for mine. Thank you though bud. (y)

www.at4forum.com

When I had my grille off I saw that the bolts that zroads uses are still there on the regular zr2 bumper

 

[ZR2EDDYB]

I don’t see why that wouldn’t work. A little googling showed that a guy with an at4x made his own brackets did basically that but with linkable baja design lights. His truck has the bison bumper, but the concept is the same. His brackets might even work with a silverado bison bumper

AEV Front Bumper Light Brackets

I ended up fabricating a behind the grill mount for mine. Thank you though bud. (y)

www.at4forum.com

When I had my grille off I saw that the bolts that zroads uses are still there on the regular zr2 bumper
View attachment 18991

I do like his approach but I do not see a similar bolt set up between the two.

Our trucks will also likely require a camera relocation tab.

I will have an update in a couple weeks.

 

[Gandalfthegrey]

Dirt King has done some similar setups. I think with the 3" pods it could be made to look good. I've contemplated doing it too.

View attachment 18985
View attachment 18986 View attachment 18987

Looks like an aftermarket bumper?

 

[ZR2EDDYB]

Looks like an aftermarket bumper?

The cut the stock bumper and then add a pre-runner type bumper on the bottom half. Those lights are mounted directly to the bumper.

 

[JaredW]

The cut the stock bumper and then add a pre-runner type bumper on the bottom half. Those lights are mounted directly to the bumper.

Yeah I think it looks decent.

 

[ZR2EDDYB]

Yeah I think it looks decent.

Nothing wrong it. I prefer not to drill or cut into the stock bumper.