Wheel and tire pics

[Je942010]

Looking for some pics of wheels and tires for my Slate Grey 2025 HD ZR2. Looking to go with preferably an 18 with a 37 if someone can confirm it will fit on a stock height setup or possible a 20” wheel. I’d like to stick with a tire that has a decent weight rating so I don’t have any issues pulling my 5th wheel.

 

[ZR2BIZON]

Not exactly what you aksed but I was able to fit 38's and wrap them over a custom 20" daffodil style rim on this picture without having to cut the bumper or the liner.
Enjoy

 

[IrishRedFish]

If your looking for pics with stuff other than stock it may be hard to find. The Zr2 HD is relatively new... Most people I know of are running the stock wheels. You may find a few here and there but there really aint that much out there right now. However there are several ZR2 HDs running 37 inch tires on the stock wheels... which can be done easily without a lift. Hope this helps.

 

[AXE]

There's some examples in this thread.

Post in thread '37's on my 2024 zr2 bison 2500hd.' https://www.chevyzr2.com/threads/37s-on-my-2024-zr2-bison-2500hd.1840/post-46004

 

[Je942010]

There's some examples in this thread.

Post in thread '37's on my 2024 zr2 bison 2500hd.' https://www.chevyzr2.com/threads/37s-on-my-2024-zr2-bison-2500hd.1840/post-46004

That was exactly what I was looking for. I was actually looking at the same Icon wheels before I posted the thread yesterday

 

[GATORB8]

37" RGs on stock 18s, slate gray.

 

[Dayzd]

I went with some 18" Innov8 wheels wrapped in 37" Toyo At3s.

 

[Je942010]

37" RGs on stock 18s, slate gray.

Stock height?

 

[Je942010]

I went with some 18" Innov8 wheels wrapped in 37" Toyo At3s.

Looks great but I don’t think I can pull off the gold with the slate grey lol

 

[AXE]

I went with some 18" Innov8 wheels wrapped in 37" Toyo At3s.

What offset is on those wheels? No center caps or would they not fit the hub cover? Are those new tires? The tread doesn't look very deep and in 37 the lugs usually look bigger.

Looks good with that bumper.

 

[Dayzd]

What offset is on those wheels? No center caps or would they not fit the hub cover? Are those new tires? The tread doesn't look very deep and in 37 the lugs usually look bigger.

Looks good with that bumper.

Thanks. The wheels are 18x9 with a 0 offset. The center caps should be here this week. I forgot to check the box when ordering. And the tires are new lol.

 

[Dayzd]

Looks great but I don’t think I can pull off the gold with the slate grey lol

I think it would look better than you think. Lol

 

[GATORB8]

Stock height?

Yes

 

[AXE]

Thanks. The wheels are 18x9 with a 0 offset. The center caps should be here this week. I forgot to check the box when ordering. And the tires are new lol.

Are the tires 12.5 or 13.5 wide? I am disappointed in the availability of wheels with 0 offset or +12 offset in 8 lug. There just isn't much selection and stock.seems to be low too.

 

[GATORB8]

Are the tires 12.5 or 13.5 wide? I am disappointed in the availability of wheels with 0 offset or +12 offset in 8 lug. There just isn't much selection and stock.seems to be low too.

Axe, Have you tried Custom Offsets? I used DT for the truck, but just ordered a set of 38s and beadlocks for the Jeep and Custom Offsets smoked everyone mounted and delivered.

To check I just threw the truck in for bolt pattern and filtered for 18s and 0 to +18mm offset and they're showing 368 options, most in 9" width.

 

[AXE]

I have looked there before. I'll check then out again. Everyone seems to show the same products and about 363 of those wouldn't make it on my rig. Seems hard to find something that is not made primarily for looks. I want a wheel that looks beeefy and is HD for towing heavy too. That rules out a lot of those wispy looking multi spoke options.

I might go with a 20 inch wheel too, because I like the proportions better with a 37x13.50 tire.

I usually buy from a local dealer like 4 Wheel Parts or Discount or one of the lift shops. That way if I have an issue, I know they can deal with it locally.